Zecre PH810W, Instruction Manual

Page: 16 / 210

3.CAMERA OPERATION
10
English
Slide the switch to "TEST / ON" to turn on the camera. Slide the
switch to "OFF" to turn off the camera.
1 )OFF Mode
Power switch in the “OFF”position. The“OFF”mode is the "safe"
mode when any actions must be taken such as replacing the
Micro SD card or batteries or transporting the device.
2)TEST Mode
Power switch in the “TEST” position (LCD screen is on). The
purpose of the“TEST”mode is to allow you to change the
settings of the camera's parameters so that it can operate the
way as you want.
3)ON Mode
Power switch in the “ON”position, LCD screen is off after count
down 5 seconds. After 1 minute, the camera will take photos
or videos automatically (according to its current parameter
settings) when it is triggered by the PIR sensor's detection of
activity in the area it covers.
"Trailcam LinK" APP can be connected in ON mode.
3.2.Setup Menu and Functions
We have two ways to setup menu: in the camera or in the APP.