3
4. Mechanical Installation
The
will handle gate weighting up to 500
kg/800kg and up to 8m/12m if the proper installation procedures
have been followed.
The
gate operator operates by forcing a drive rack by a
drive gear. The entire configuration is shown in the diagram below.
The gate operator must be installed on the inside of the gate.
Fig.1
Gate preparation
Be sure the gate is properly installed and slides smoothly before
installing the
sliding gate operator. The gate
must be plumb, level, and move freely.
Conduit
PY-500ACU/PY-800ACU SLIDING GATE OPERATOR
PY-500ACU/PY-800ACU
PY-500ACU
PY-500ACU/PY-800ACU
