■
Ask a professional to install.
■
Read the manual before installing and using the
dryer to ensure that it has been installed and is
used safely and correctly.
Content
Important Safety Instructions .................................................... 1
Features .................................................................................... 2
Product Diagram & Water Tank Maintenance ................. 3
Exploded View ....................................................................... 4
Installation & Maintenance ................................................. 5
Function & Specification ...................................................... 6
Troubleshooting .................................................................... 7
Electrical Schematic ............................................................ a
Forbidden
I\.
WARNING
lfu�ed incorrectly,
�
accidents may occur.
•Do NOT remove the front board because of the risk
of electric shock.
•Do NOT use in wet or damp areas, especially bathrooms or
shower rooms. There is a significant risk of electric shock.
Forbid to Use in
Bathroom
&
Showeroom
• Do NOT splash water on the appliance.
Cut off the power when maintaining, or it may cause electric shock.
No
Watering
No
Unassemble
• Do NOT try to unassemble or modify the unit.
Or it may cause fire, electric shock or other accidents.
0
Follow the
Instruction
malfunction
•
Grounded
•
Power Supply: AC 220V /50Hz
• If used the unit is used outside the recommended power supply
there is a risk of fire,electric shock and malfunction.
• The unit must be installed to its own fused spur, if the unit is installed
with other units on the same power source it may cause the unit to over
heat and catch fire.
•Cut off the power supply before performing any maintenance on the unit.
Or ii may cause electric shock .
• Ensure the unit is grounded or earthed.
Failure to provide a suitable earth can result in electric shock.
• Ensure the hand dryer is installed by a certified electrician.
II may cause electric shock & fire when wiring incorrectly.
• Ensure the unit is installed to a suitable circuit breaker.
Or ii may cause electric shock.
1
