Zebra-Tech UW-Caliper Operation Manual
| 8 |
5.
Communicating with your UW-Calipers
Installing UW-Caliper software onto a PC
The UW-Calipers are supplied with a flash drive that carries the file ‘Install
UW-Caliper version #’. Simply double clicking this file should start the
installer which handles the installation of the software onto the PC.
The latest version of the software can also be downloaded from the Zebra-
Tech web site
http://www.zebra-tech.co.nz/downloads
Connecting the UW-Caliper to a computer
Unscrew the charging/coms cap from the end of the calipers.
Push on the communication cable plug, and tighten the locking sleeve.
Plug the USB connector into the PC, and start ‘UW-Caliper’ software.
NOTE!
It is recommended that the UW-Caliper software is
installed BEFORE the calipers are connected to the PC for
the first time.
