SETTING THE WIPE INTERVAL
1 4
The wipe interval is the period of time between the start of one
wipe and the start of the next. The optimal wipe interval will
depend on environmental conditions at the field site. Generally a
wipe interval of 2 to 3 hours should prove sufficient to keep the
sensor clean in moderate fouling conditions.
The wipe interval is controlled by the position of the wipe interval
switch. Refer to table 3 on page 14 and set the wipe interval
switch at the desired setting as shown in the photo below.
NOTE!
Ensure the Hydro-Wiper is switched off when adjusting
the wipe interval.