Android Handheld Computer
v
U
SER
’
S
M
ANUAL
Laser Devices
Class 2 laser scanners use a lower power, visible light diode. As with any very bright light
source, such as the sun , the user should avoid staring directly into the light beam.
Momentary exposure to a class 2 laser is not known to be harmful.
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Power Adaptor
Use only a Z-2242 approved Power Adaptor with electrical ratings : Output 5VDC,
min 2A, with a maximum ambient temperature of at least 45
℃.
Use of alternative power adaptor will invalidate any approvals given to this device
and maybe dangerous.
Battery Information
Use only a ZEBEX approved batteries.
When batteries are stores over six (6) months, some irreversible deterioration in overall
battery quality may occur. Store batteries at half of full charge in a dry, cool place,
removed from the equipment to prevent loss of capacity, rusting of metallic parts and
electrolyte leakage. When storing batteries for one year or longer, the charge level should
be verified at least once a year and charged to half of full charge.
Batty Safety
The area in which the units are charged should be clear of debris and combustible
materials or chemicals. Particular care should be taken where the device is charged
in a non -commercial environment.
Follow battery usage, storage, and charging guidelines found in the user guide.
Improper battery use may result in a fire, explosion, or other hazard.
To charge the device battery, the battery and charger temperature must be between
0
℃
~+45
℃
Do not use incompatible batteries and chargers. Use of an incompatible battery or
charger may present a risk of fire, explosion, leakage, or the hazard.
Do not disassemble or open, crush, bend or deform, puncture, or shred.
Severe impact from dropping any battery-operated device on a hard surface could
cause the battery to overheat.
Do not short circuit a battery or allow metallic or conductive objects to contact the
battery terminals.
Do not modify or remanufacture, attempt to insert foreign objects into the battery,
immerse or expose to water or other liquids, or expose to fire, explosion, or other
hazard.
