Z-1160
3
U
SER
’
S
M
ANUAL
Getting Started
Refer to the following illustrations to learn the basics of the data collector in this section.
Attaching Neck Strap
The included neck strap may prevent potential damage to the device if dropped.
1.
Insert the small thin cord of the strap to the strap hole of the device.
2.
Loop the thick cord of the strap through the thin loop.
3.
Pull the strap tight.
Charging the Device
The Z-1160 runs on a build-in rechargeable battery and can scan more than 6,000
barcodes between charges and data downloads to a host device.
1.
Connect the USB cable to device.
2.
Connect the other end of the USB cable to your PC. The LED should light up red
indicating the charge had started.
3.
Charge the batteries until the LED indicator turns off.
Power ON/OFF the Device
Press the v and ^ keys together to turn on the device. To turn off the device, press and
hold FN at the boot screen.
Power ON
