background image

Limited Lifetime Warranty To The Original Owner

1.   Your Z / Flathead is guaranteed against defects in materials and work-

manship.  This guarantee does not cover normal wear, or damage from 

accident, abuse, neglect, alterations, improper usage, or failure to follow 

reasonable care and maintenance as outlined in this manual. Under this 

limited warranty, Zeagle will either repair or replace, at its sole option, any 

original equipment or parts that fail to perform as intended. Shipping and 

Labor charges are not included and must be paid by you. To validate your 

warranty, you must fill out and return your warranty registration card within 

30  days  of  purchase.  This  Limited  Lifetime  Warranty  excludes  filters, 

hoses, O-rings, diaphragms and mouthpieces, which are warranted for two 

years from the regulator’s date of purchase. Filling out the card requires 

printing CLEARLY the serial numbers of both the first 

and  second  stages.  The  first  stage  serial  number  is 

stamped on the first stage on the top of the regulator 

(fig. 1). The second stage serial number is stamped on 

the mouthpiece tube (fig. 2). To read this serial number 

you must fold back the flexible silicone mouthpiece to 

expose the numbers. Each serial number consists of a 

pre-fix letter followed by six numbers. 

All of the digits of both the first and second stages must 

be CLEARLY printed on your warranty registration card 

for your warranty to be activated. You can also register 

at www.zeagle.com.

2. For proof of original ownership, 

 It is your record of when and where the regulator was purchased. 

It also lets you know when your annual service should be performed.

3.  To  keep  the  original-owner  Limited  Lifetime  Warranty  in  effect,  you 

must  have  your  regulator  inspected  and  serviced  annually,  within  30 

days before or after the anniversary of the purchase date. Failure to do 

so will invalidate your warranty. This servicing must be performed by an 

authorized Zeagle dealer. Save the receipts from this servicing for your 

records.

3

Fig. 1

Fig. 2.

ID #

Summary of Contents for Flathead-7





















Reviews: