29
User’s manual
EN
USE OF THE ROBOT IN CLOSED AREAS WITH NO CHARGING STATION
The start-up of the robot in “closed area” mode is for mowing closed areas that are marked off by the perimeter wire and have
no charging station.
Danger - Attention
Safely stop the robot (see “Robot Safety Stop”) and carry it using the handle provided. Do not grab the robot
by the body and always use the handle provided.
1. Position the robot inside the work area at a minimum distance
of 100 cm (39.37 in.) from the perimeter wire and from any
other obstacles.
2. Press the ON/OFF button and wait a few seconds for the robot
to turn on completely. Follow the instructions in the display and
enter the password, if prompted.
3. Select the key.
4. Select the “closed area” key.
5. Set the time for the end of the working cycle, and select “OK”.
At the end of the working cycle, stop the robot in safe conditions
(see “Robot Safety Stop”) and carry it back to the area where the
charging station is located.
Restore the normal functioning of the robot as described in chapter
“INITIAL START UP – AUTOMATIC MODE.”
min.
100 cm
(39,37 ")
min.
100 cm
(39,37 ")
.....................................
......................
10:30
10:30
10:30
Summary of Contents for PRO TECH35 i
Page 1: ...TECH35 i...
