4. Configure the common RF setting as such
Country/Region
domain and
Channel
.
5. Click Apply to save the changes.
6. Go to
RF Configure
>
Security Profile
.
7. Click one of the profiles #, tick the Enable box
and press Edit.
8. Clear the
Security Profile Name
and
Wireless Network Name (SSID) box, and
then type a unique name that you desire to
call this wireless network. This will help
users identify this wireless network in their
wireless network connection.
9. Adjust the maximum connected users if
necessary.
10. In
Network Authentication
, select the
desire authentication method and then
enter the encryption phrase accordingly.
11. Click
Apply
to save the changes.
12. Click
Logout
to exit the Web interface.
STEP 4: VERIFY THE CONNECTION
1. Use any wireless-enabled computer or
mobile device to search for and select the
wireless network you’ve previously
configured.
2. If you can connect, open a browser and
link to any public website.
STEP 5: INSTALL THE AP
1. Disconnect the AP’s power adapter from the
power outlet (or disconnect the PoE cable).
2. Move the AP to its permanent location
(accessible to both power source and
network connections).
Note:
Make sure that sufficient survey has been made
to determine the best placement for maximum
range, coverage, and network performance
before installing.
MOUNTING ON A POLE
1. Secure the mounting clip to the back of
the wireless AP with four screws.
2. Slide the securing rings through the
mounting bracket. Adjust the straps to
make sure that the rings are securely
fastened to the pole.
3. Slide the mounting clip into the slot on
the mounting bracket.
4. Insert the bolt into the hole on the
mounting clip the mounting bracket, and
secure the end with the lock nut.
Note:
Make sure that the pole for installation is securely
attached to a solid, stable base.
Note:
Do not tighten the lock nut completely at this
time, as you may need to make adjustments to
obtain good signal strength.
