background image

SP230/SP230-S5 

2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point 

QSG

 

 

 

4  

Grounding Connection & Protect from Lightning 

1.

 

Make your device GND port connect to ground wire. 

2.

 

The ground wire connects to the earth. In addition, the 
grounding wire meets to 6-AWG copper grounding wire. 

Safety Notice 

1.

 

Do not install the device close to any electrical grounding device or lightning protection system. 
Place the device’s own grounding and lightning protection system apart from any electrical 
grounding device and lightning protection system as far as possible. 

2.

 

Protect components from electrostatic discharge: Please wear an ESD wrist strap or handle the 
power adapter by its edge and do not touch any component or printed circuit boards, 
especially for module device. 

3.

 

Make sure to keep the temperature and humidity of the installation location at an optimal 
level.   

4.

 

An excellent grounding system guarantees the stable operation of device, as well as to protect 
device from lightning, interference and electrostatic discharges. 

5.

 

If installed outdoors, the device may be damaged by lightning. We recommend that you install 
additional lightning protection devices if necessary, considering the conditions in your area. 

6.

 

Supply stable power to the device. Unstable power may cause the device to malfunction. The 
device supports PoE power supply and is recommended if the device is installed near grid lines 
within less than 100 meters radius. 

 

Installing a Waterproof Cable Gland for Ethernet Port

  

(Optional accessory_

 

SP-WP-CM20)

 

 Dismantle all the components of waterproof cable gland, and plug the cable 

through it. Thread and assemble one by one: (1) sealing nut (2) plastic ring (3) 

rubber (4) locking nut. Securely tighten all the components. 

 

 

 

 

Note:

 Be sure that grounding is available and that it 

must comply with local and national electrical codes. 

For additional lightning protection, use lightning rods 

and lightning arrestors. 

Summary of Contents for SP230 Series











Reviews: