background image

AS220V2 

2x2 Dual Band 802.11ac Wave 2 Indoor Access Point 

QSG

 

FAP Mode 

The default AP mode is TAP mode, before FAP configurations please change AP mode.  
Step 1.

 

If currently in TAP Mode: On the Web interface menu, click System

AP mode.  

Step 2.

 

Select Fat AP from the drop-down list. 

Step 3.

 

Click save & apply to take effect. 

 

 

 

Note: 

For FAP mode, please refer to the user manual for more information. 

https://www.zcom.com.tw/index/downloads

 

 
Wi-Fi SON 

Z-COM Wi-Fi SON accelerates the connection between devices, providing users a quick installation 
and easy deployment capabilities. Please refer to the user manual for more information. 

https://www.zcom.com.tw/index/downloads 

Mobile APP 

Z-COM offers the App for bridge mode settings, which is available from our website: 

https://www.zcom.com.tw/index/downloads

. Please research and download it to provision. 

If necessary: reset button 

If the access point needs to be reset, please press and 
hold the reset button for more than ten seconds to 
restore to factory default settings. 
 

 

Technical Specifications 

Physical 

Dimensions  
(L x W x H) 

96 x 29.9 x 192 mm 
(3.78 x 1.18 x 7.56 in) 

WAN/PoE In Port 

One 10/100/1000 Mbps port  

Weight 

500 grams (1.1 lbs.) 

LAN/PoE Out Port 

One 10/100/1000 Mbps port 

Antenna 

2.4GHz: Embedded 2dBi omni antennas 
5GHz: Embedded 2.5dBi  omni antennas 

Power Supply 

DC 48V, 0.5A PoE, or DC Jack (optional accessory) 

Summary of Contents for AS220V2










Reviews: