background image

zBoost

®

 Max ZB545M Manual

iii

not by an attenuator at the output of the device.
Cet appareillage numérique de la classe [B] répond à toutes les exigences de l’interférence 

canadienne causant des règlements d’équipement. L’opération est sujette aux deux conditions 

suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter 

n’importe quelle interférence reçue, y compris l’interférence qui peut causer l’opération peu désirée.
Le fabricant nominale de la puissance de sortie de ce matériel est simple transporteur. Pour les 

situations lorsque plusieurs signaux porteurs sont présents, l’évaluation devrait être réduite de 

3.5 dB, en particulier lorsque le signal de sortie est ré-émise et peut provoquer des interférences 

adjacentes à la bande utilisateurs. Ce pouvoir est de la réduction par le biais de la sortie 

d’alimentation ou la réduction de gain et non par un atténuateur à la sortie du dispositif.

Please note: This unit has been approved for use in Canada under RSS 131, however, consent 

for the use of this device to improve cellular or PCS coverage, must be obtained through your 

cellular or PCS provider, prior to placing the unit in operation. Please refer to the Industry Canada 

document CPC 2-1-05, Section 6.1 available or viewable at:  

http://www.ic.gc.ca/epic/site/smt-gst.nsf/en/sf08942e.html

Copyright Notice

This manual is copyrighted. All rights reserved. This manual, whole or in part, may not be copied, 

photocopied, reproduced, translated or reduced to any electronic medium or machine readable 

form for distribution. This manual whole or in part, may not be modified without prior consent, in 

writing, from zBoost. 

Copyright © 2014 by zBoost.

Trademarks

zBoost, the zBoost logo, Wireless Extenders, Wi-Ex, the Wi-Ex logo, and Extending Cell Zones are 

registered trademarks of zBoost.

Safety Guidelines

In accordance with FCC requirements of human exposure to radiofrequency fields, the radiating 

element (antenna) shall be positioned such that a minimum separation distance of 8 inches (20cm) 

is maintained between the radiating element and the user and/or general population.

Limited Liability

In no event shall zBoost be liable for any direct, indirect, special, punitive, incidental, exemplary 

or consequential damages, or any damages, whether in an action under contract, negligence, 

or any other theory, arising out of or in connection with the set up of, use of, inability to use, or 

performance of the information, services, products, and materials available from this manual. 

These limitations shall apply notwithstanding any failure of essential purpose of any limited 

remedy. Because some jurisdictions do not allow limitations on how long an implied warranty 

last, or the exclusion or limitation of liability for consequential or incidental damages, the above 

limitations may not apply to you. 

For full warranty guidelines, see page 12.

Safety and Product Warranty Information

 Note

Changes or modifications not expressly approved by 

zBoost could void the user’s authority to operate this 

equipment and/or void the product warranty.

Summary of Contents for ZB545M





















Reviews: