background image

zBoost

®

 Xtreme ZB545X Manual

8

Confirm That Your zBoost is Working Properly

When your zBoost system is in place and fully connected, you should walk throughout the room 

and see that you are able to reliably place calls.

Remember, coverage varies based on outdoor signal level, home construction, and antenna 

placement. Coverage in adjoining rooms (next to, above, or below) will be reduced due to walls or 

ceiling/floors.

Should you desire to improve coverage, you may:

• 

Relocate the External Antenna in order to capture a better signal – higher is usually better 

and outside is better than inside.

• 

Increase the distance between the Indoor Antenna and the External Antenna.

• 

Purchase an upgrade antenna available at www.zBoost.com.

Improving Your Coverage Area

 

Note

Cell phone signal bars are approximate and vary from 

phone to phone. The number of bars can fluctuate 

widely, depending on the location of the phone, the 

position or angle of the phone, weather, etc. Most cell 

phone signal meters update every 6 to 10 seconds. An 

increase of only one bar typically indicates a 4x to 10x 

signal increase.

THE BEST INDICATOR OF PRODUCT 

PERFORMANCE IS THE ABILITY TO RELIABLY 

PLACE AND RECEIVE CALLS WHERE YOU COULD 

NOT BEFORE.

Summary of Contents for Xtreme ZB545X





















Reviews: