zBoost
®
TRIO ZB575 Manual
8
FOURTH: Connect the zBoost Base Unit to Power
Connect the zBoost Base Unit to the provided power supply and plug into a power outlet.
Upon initial power up, the LED will cycle RED, GREEN and ORANGE for 30 seconds. After 30
seconds, a series of GREEN flashes will indicate the quality of your setup. Following this, a solid
GREEN light indicates normal conditions. If it is not solid GREEN, follow the instructions in the
Base Unit LED Indicators section. Adjustments may be needed to optimize performance. If you find
the increased signal coverage is acceptable, however, no additional adjustments are needed. See
“zBoost Base Unit Light Indicators” on page 10) for more information.
Confirm That Your zBoost is Working Properly
When your zBoost system is in place and fully connected, walk throughout your home and verify
that you can place calls and have fast, reliable data speeds. If the signal strength has improved,
your zBoost is working. Remember, coverage varies based on outdoor signal level, home
construction, and antenna placement. Coverage in adjoining rooms will be reduced by walls and
building materials.
zBoost Base Unit
Power Supply
Indoor Antenna
Coaxial Cable
External Antenna
Pole Bracket
Saddle
U-Bolt
Figure A
15 ft. of vertical
separation
