ZBA Inc
.
Page 12 of 33
A Bluetooth service Authorization window will pop out. Set always allows the
device access to enable and click “Yes”.
Upon completion of the pairing procedure then you can commence the connect
function. The connect message appears at the right corner to indicate the COM
port number to connect. Set the COMM port number to the software you used.
The PDC can start communication with the PC by “WinTaskGen” software or
“Upload” mode. Please refer to section “
Use Windows Task Generator
” and
“
Upload Data
”
1.6.4. Pairing and Connect to a SPP Slave PDC:
To pair and connect a SPP slave PDC, the slave mode and PIN code must be
set prior to operation. Power on the PDC and press
FN
to show “Remote
Screen”, follow by press
^
to start connect. The PDC operating as a Slave is now
waiting for the master dongle to commence communications.
Single-click the red ball in the main window of BlueSoleil, This will start the
inquiry process of all Bluetooth devices within radio range. All devices located
