Zaxcom QRX235, User Manual

Page: 8 / 39

Zaxcom QRX235 Main Menu
8
Main Menu
Navigating the Main Menu
•
To enter the main menu - press the MENU key.
•
To advance to the next menu press the MENU key again.
Exiting the Main Menu
•
To exit the main menu at any time press and hold the MENU key for 1.5 seconds.
Frequency Adjust
The frequency select menu is where the QRX235 receive frequencies are set. These frequencies need to match
the frequencies that are set on the corresponding transmitters.
Adjusting the receive frequency of the QRX
•
Press the INC key and DEC key to adjust the frequency.
•
In dual receive mode pressing the A/B key will toggle between the A and B receiver.
The > will indicate the receiver being adjusted.
Transmitter Gain Adjust
This menu is only available when transmitter remote control is set to “ON” in the extended menu.
The transmitter gain menu allows for the input gain on the transmitter to be remotely adjusted when the QRX235
has a QIFB option board installed the gain of the corresponding transmitters. The transmitter gain menu will
display the gain level and an audio meter with a -20dBFS and -10dBFS mark on the right.
Adjusting the transmitter gain remotely
•
Press the INC key to increase the transmitters gain. As the gain is inc + +” will replace the gain level.
•
Press the DEC key to decrease the transmitters gain. As the gain is decreased “- - -” will replace the gain level.
•
When in dual mode pressing the A/B key will toggle between the two transmitters.
TX A 24
GAIN
CH A > 567.4
CH B 570.0