Zaxcom QRX212, User Manual

Page: 9 / 22

Zaxcom RX12 System Menu
9
System Menu
To access the system menu press the MENU encoder knob.
Receiver Configure Menu
The receiver configure menu is where each of the 6 QRX212 receiver modules are be set up from. To access the
receiver configure menu press the star key from the home screen. Or select it from the system menu.
Once in the receiver configure menu individual receiver modules can be accessed by pressing the corresponding
number key on the numeric keyboard.
RX Mode
From the RX mode menu each individual QRX212 module can be powered on and off and set to single or dual
mode.
Mode

Single – The QRX212 module is set to receive a single TRX transmitter.

Dual – The QRX212 module is set to receive signal from two TRX transmitters
Power
This is used to toggle on and off the power to the QRX212 module. Turning power off will shut off the
individual module and will conserve power.
Frequency
This displays the current frequency that the QRX212 is set to and is where the frequency for the A and B receiver
can manually be set from.
To set the frequency highlight the frequency of the receiver you would like to change and rotate the menu
encoder knob, or press the desired frequency on the numeric keypad.
Transmitter Gain
If the RX12 is connected to a Nomad, IFB200, TRX900CL or a QRX with QIFB, the gain for each TRX
transmitters can be adjusted from here and will be remotely sent to the TRX transmitters via the serial port
connection.
In each receiver configuration menu the status
of each transmitter will be shown. This is the
same configuration that is in the home screen.
Included are the frequency, battery level, signal
strength and audio levels.