19
When selecting a period of time without any video recorded on the
Playback
’s
Video Area
, a black screen is showed with nothing but a “no video” icon
in
the center.
Icon
Name
Description
No video
No video is being recorded at the moment.
No MxPEG MxPEG codec is only supported on remote browser/application.
Out of resolution
:
Please set the
cameras of which
resolution are over
1920x1200
In firmware version 1.2 or above
H.264
: no resolution limitation on single channel, the total capacity is around:
- 8 channels: 5M / others: 2M - 6 channels: 8M / others: 2M
*The actual performance depends on the type of cameras.
MPEG4
: Up to 2M (1920x1080) per channel
MJPEG
: Up to 4M (2560x1600) per channel but with limited fps support
Before firmware version 1.2
H.264
: Up to 4M (2560x1600) per channel
MPEG4
: Up to 2M (1920x1080) per channel
MJPEG
: Up to 4M (2560x1600) per channel but with limited fps support
To configure how to present the
Video Area
, see
OSD
.
Double-click on a channel for full screen view. Double-click again to minimize.
2
nd
stream playback is not supported on local client.
H.265 Live view/ Playback is not supported local client.
Video Area
on
Playback
screen
By default, the name of the camera shows in the
upper-left corner of the
Video Area
.
It allows better
identification of the camera channel.