P
r o f e s s io n a l
F M H
a n d h e l d
T
r a n s c e iv e r
it, the screen only display the current working channel.
3. In dual standby mode, if one of the channels receives a
signal, and the mark will point to the channel, indicating the
channel is currently being edited.
4. In dual standby mode, press
PTT
key, it will launch the cur
rently edited channel.
5. Press
[TDR]
to switch the currently being edited channel.
ANI Function
• By using the program ming software to edit the transceiver
ID.
• By
[m enu 10]
to turn on / off the ANI function. W hen the
ANI function is turned on, and press
[PTT]
will launch the
ID. W hen receiving other transceiver ID, it will display on
the LCD. At this time, any other key except
[M O NI]
can
clear the ID.
• By
[menu 12]
to turn on / off ANI reverse function, it can be
used to relay comm unication.
m
