background image

II

SAFETY

It is important for you to read the following carefully in order to use this 
transceiver safely and effi ciently.

Please DO NOT try to open the transceiver. Modifi ed by laypeople 

 

may do damage the transceiver.

Please turn off your transceiver when you enter the place with the 

 

sign” Please turn off radio”, such as hospital and other medical 
care place to avoid electromagnetism interfere or electromagnetic 
compatibility. Please turn off your 2way radio when it is requested 
by aircrew on the plane.

Please DO NOT put the transceiver in the area of airbag if you are 

 

in a car with airbag.

Please TURN OFF your transceiver before entering fl ammable and 

 

exposable place.

Please DO NOT use broken antenna. Broken antenna might cause 

 

slight burn if it touches skin

Please DO NOT expose the transceiver to direct sunlight for a long 

 

time: DO NOT place the transceiver near any heating devices. Ei-
ther high temperature might shorten the life of electrical parts and 
also might cause some plastic transform.

Please DO NOT put the transceiver in dusty or dirty place.

 

Please keep the transceiver dry. Rain and damp may erode the 

 

PCB.

If an abnormal odor or smoke is detected coming from the trans-

 

ceiver. TURN OFF the power immediately and remove the re-
chargeable battery pack from the transceiver and contact with 
your dealer.

SAFETY INFORMATION

Summary of Contents for T30



















Reviews: