Operating and assembly instructions
Z200 / Z300
21
Z200 / Z300
Extension pipe
Order no.: 44449
Ballast weights
Order no.: 44460
5.3. Maintenance, repair, storage and cleaning
Clean the scaffold with water and commercial cleansers. If paint gets on the scaffold, it can be
removed with turpentine. Cleansers may not penetrate the soil; used cleansers must be disposed
of in accordance with the applicable environmental regulations.
Greasing the moving parts
Grease all moving parts (spindle, swivel castor bearing, catches) with commercial oil. For use
in the winter, use low viscosity oil. Wipe off excess oil, the oil may not reach the treads - danger
of slipping. Dispose of cleaning rags soiled with grease in accordance with the applicable
environmental regulations.
Storage
Storage must be in a manner such that damage to the unit is excluded. The scaffold components
must be stored so that they are protected against the effects of weather. During transport to
or from the storage location, the scaffold components must be secured against slipping and
bumping as well as falling down. When loading, the scaffold components may not be thrown.
5. Stability specifi cations
5.1. General information
Chassis beams and stabilisers are responsible for the stability of the scaffold. However, these
must also be ballasted according to the area of deployment (indoors / outdoors). For the correct
ballasting, please see the parts lists (packet 2.8).
5.2. Fastening the ballasting
The attachment location and the quantity of the ballast weights depend on the type of assembly
and platform height of the scaffold. For the precise quantity of the ballasting, please see the parts
lists in section 2.8 (lower portion of the tables).
Attach ballast weights over the supports on the swivel castors, see Fig. below. For scaffolds for
which a larger number of ballast weights are required, the supports on the chassis beams can
be lengthened with slip-in pipes (accessory, order no. 44449).
Z200-300-AA-RC4_EN.indd 21
Z200-300-AA-RC4_EN.indd 21
28.02.2008 10:21:51
28.02.2008 10:21:51
