9
D
ANGER
D
ANGER
OF
SERIOUS
OR
FATAL
INJURY
AS
A
RESULT
OF
FALLING
FROM
THE
POLE
ACCESS
LADDER
Follow these basic rules when ascending and descending the ladder to prevent dangerous situations arising:
> Wear a safety harness in accordance with DIN EN 361 and use a ZAST-OPTIFLEX-R4
safety slide mechanism.
> Face the ladder and grip the side stiles with both hands when ascending and
descending. Ascending or descending the ladder without holding on with both
hands is prohibited.
> Never carry loads in your hands.
> Do not exceed the maximum permissible load of 150 kg.
> Exit the ladder if strong winds occur. Never use the pole access ladder when wind
speeds exceed 12 m/s (wind strength 6 on the Beaufort scale).
> Never work from above or release the ladder from the pole when moving the ladder
to a new position.
> There is an increased risk on the first 3 m of the bottom section of the ladder, where
the ZAST-OPTIFLEX-R4 safety slide mechanism does not provide full protection.
Proceed with particular caution when ascending or descending in this area of the
ladder.
> It is essential to use a suitable follow-on safety device when exiting the system at
the top end of the ladder.
5.2
Use
6. Dismantling, storage and transport
6.1
Dismantling
• To dismantle the product, follow the instructions for assembly in reverse order.
• We recommend that personnel work in pairs when dismantling the equipment.
D
ANGER
D
ANGER
OF
SERIOUS
OR
FATAL
INJURY
AS
A
RESULT
OF
FALLING
FROM
THE
POLE
ACCESS
LADDER
!
Observe the following when dismantling the product:
> Always descend to the next lower ladder element and secure yourself there with
the ZAST-OPTIFLEX-R4 safety slide mechanism before releasing the attachment
of the top ladder element.
> To release the securing rope from the jam cleats, undo the knot and tug on the
rope. This loosens the rope.
6.2
Storage
• Store the pole access ladder in such a way that it cannot be damaged. Store the pole
access ladder in a location where it is protected from the elements, and if possible,
store it laid flat.
6.3
Transport
• Never transport the pole access ladder when it is assembled.
• Dismantle the pole access ladder (see 6.1 "Dismantling“) and pack it for transport.
• Secure components with a strap to prevent them sliding or falling during transport.
Never throw components during loading or unloading.
For instructions on the use of the pole access ladder,
see the illustrations section of this manual, Page17 .
Summary of Contents for Skymaste Industrial Z600
