10
7. Maintenance and servicing
7.1
Cleaning
• Clean the pole access ladder with a solution of water and a standard cleaning agent.
W
ARNING
D
ANGER
OF
SLIPPING
ON
WATER
IN
THE
WORKING
AREA
!
> Dry standing surfaces and holding devices thoroughly after cleaning.
N
OTE
D
ANGER
OF
ENVIRONMENTAL
DAMAGE
!
> Cleaning agents must not be allowed to seep into the soil!
> Dispose of used cleaning solutions in accordance with the applicable environmental
regulations!
7.2
Inspection
Pole access ladders must be regularly inspected by a technical expert to ensure that
they are safe to use. Regularly means that the inspection intervals must be selected to
suit the operating conditions.
In the case of continuous and intensive use, daily inspection of the ladders may be
necessary. If the ladders are seldom used and loads are light, inspection must be
performed at least once a year.
The technical expert is authorised to carry out inspection by the operator and must have
attended the seminars prescribed by law in the country concerned.
• Following
successful
inspection, the ZARGES inspection plate (Order No. 891209
or 828384) must be attached to the product. The month and year in which the next
inspection is due must be clearly legible for users of the equipment.
Inspection must cover the following points
7.2.1 Deformation, denting and cracks
Check the following components for deformation, denting and cracks:
• ladders and rails, karabiners, lugs
> If any component is found to be faulty, the pole access ladder must not be used.
> If a fall has occurred, the ladder segment in question must always be replaced.
7.2.2 Correct functioning
Before using the pole access ladder, check the following components for correct
functioning:
• karabiners, safety fasteners, fall protection, overrun, locking mechanisms
> If any component is found to be faulty, the pole access ladder must not be used.
Inspect the ZAST-OPTIFLEX-R4 safety slide mechanism in accordance with the
ZAST-OPTIFLEX-R4 operating instructions.
7.3
Repairs
Effecting repairs of any kind to the equipment is prohibited. Any damaged parts must be
replaced.
7.4
Spare parts
Each product produced to customer specifications is assigned a serial number. The
serial number can be found on the type plate. This serial number can be used to order
appropriate spare parts.
Use only original spare parts manufactured by ZARGES.
Summary of Contents for Skymaste Industrial Z600
