en
Maintenance
If the hand crank has too much or too little resistance, it must
be adjusted at the balancer.
Notes
The crank force setting depends on the weight of the operator.
• Turning clockwise increases the pulling force of the
balancer, so that less force needs to be applied at the crank.
• Turning anti-clockwise reduces the force of the balancer,
so that more force needs to be applied at the crank.
At the factory, the lift is set to a body weight of 80 kg.
After adjusting the crank force, a new functional check must
be carried out (see E1).
F5
