Page 6
2.2.b Potentiometer
The Potentiometer should be wired in the 3 - Wire Configuration.
CPOT (A2) signal ranges from 0 to 10V.
Minimum Potentiometer Resistance :
500
Ω
Maximum Potentiometer Resistance :
10k
Ω
Faults can occur if the potentiometer is out of this range.
The Procedure for automatic potentiometer signal acquisition is carried out using the
Console. This enables adjustment of the minimum and maximum useful signal level
(PROGRAM VACC function), in either direction. This function is unique when it is
necessary to compensate for asymmetry with the mechanical elements associated with
the potentiometer, especially relating to the minimum level.
The two graphs show the output voltage from a non-calibrated potentiometer with
respect to the mechanical “zero” of the control lever. MI and MA indicate the point
where the direction switches close. 0 represents the mechanical zero of the rotation.
The Left Hand graph shows the relationship of the motor voltage without signal
acquisition being made. The Right Hand Graph shows the same relationship after
signal acquisition of the potentiometer.
