6
STEP 6 : GYROSCOPES RESET
Zapata Flyride™ gyros are reset each time the system is started (red button).
When starting (red button) please wait 10 seconds: one vibration is sent to the handlebar. This
means that the gyroscopes are reset.
We advise to perform a gyroscopes reset when the machine is stationary, for example on a dock. It is
possible do so on a yacht if stationary. Whenever possible use a solid flat base free of motion to
calibrate
In the event that the machine has been accidentally stopped at sea, it is possible to proceed in the
water, while trying to keep it as stable as possible (it is not necessary to keep the machine flat). We
advise to reset the gyroscopes once on a still surface.
Note: To avoid resetting the gyroscopes again, it is possible to leave the machine in standby. In this
case, do not turn off the system (red button). The machine will automatically be in sleep mode when
not in use. Sleep mode can last for several days.
