Zanussi ZWT816PCWA Page 26 User Manual Download

Page: 26 / 44

CHECK THE POSITION OF THE DETERGENT

FLAP
1. Pull out the detergent dispenser until it stops.

2. Press the lever down to remove the dispenser.

3. To use powder detergent, turn the flap up.

4. To use liquid detergent, turn the flap down.

With the flap in the position DOWN:

• Do not use gelatinous or thick liquid

detergents.

• Do not exceed to liquid detergent dose

indicated on the flap.

• Do not set the prewash phase.

• Do not set the delay start function.

5. Measure out the detergent and the fabric

conditioner.

6. Carefully close the detergent dispenser.

Make sure that the flap does not cause a blockage

when you close the drawer.

SETTING A PROGRAMME
1. Turn the programme dial to select the desired

washing programme.

The indicator of Modo - Lavar button illuminates.
The indicator of the Inicio/Pausa

button

flashes.

The display shows an indicative programme

duration and the maximum load.

2. To change the temperature and/or the spin

speed, touch the related buttons.

3. If desired, set one or more options by touching

the related buttons. The related indicators

illuminate on the display and the given

information changes accordingly.

If a selection is not possible an

acoustic signal sounds and the display
shows

STARTING A PROGRAMME

Touch the Inicio/Pausa

button to start the

programme. It is not possible to start the

programme when the indicator of the button is off

and doesn't flash (e.g. the door is open).
The related indicator stops flashing and stays on.

The programme starts, the door is locked. The
display shows the indicator

The drain pump can operate shortly

before the appliance fills water.

STARTING A PROGRAMME WITH THE DELAY

START
1. Touch the Inicio Diferido button repeatedly until

the display shows the desired delay time. The

related indicator comes on.

2. Touch the Inicio/Pausa

button. The

appliance door locks and starts the countdown

of the delay start. The display shows the
indicator

When the countdown is completed, the programme

starts automatically.
Cancelling the delay start after the

countdown has started
To cancel the delay start:
1. Touch the Inicio/Pausa

button to pause the

appliance. The related indicator flashes.

2. Touch the Inicio Diferido button repeatedly until

the display shows .

3. Touch the Inicio/Pausa

button again to

start the programme immediately.

Summary of Contents for ZWT816PCWA













































Search results

Summary of Contents for ZWT816PCWA

Reviews:

Related manuals for ZWT816PCWA

Brands by name

Popular brands

Zanussi ZWT816PCWA, User Manual

Search results

Summary of Contents for ZWT816PCWA

Reviews:

Related manuals for ZWT816PCWA

Brands by name

Popular brands