Mounting the door
Fix the hinges to the hinge supports on the appli-
ance by means of the two supplied screws B.
The hinges can be adjusted to compen-
sate for possible uneven thickness of
the door.
2
N
1
E
D
C
Counter-magnet
The appliance is pre set for a magnetic closure.
For a correct closure:
1. Position the screw C and the counter-magnet D
on the magnetic plate N. Lean the cupboard
door against the screw until it leaves a mark.
2. Open the cupboard door and screw the coun-
ter-magnet D (steel disk + rubber ring E) with
the screw C in the inner side of the cupboard
door, where the screw left the mark as descri-
bed in the first step.
PRODUCT DESCRIPTION
APPLIANCE OVERVIEW
10
11
12
13
2
1
3
5
4
7
6
8
9
1
Hinge supports
2
Detergent dispenser
3
Control panel
4
Magnetic plate
5
Door handle
6
Rating plate
14
