If required, pour fabric softener into the com-
partment marked
(the amount used must not
exceed the «MAX» mark in the drawer). Close
the drawer gently.
Select the required programme by turning
the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine will
propose a temperature and automatically select
the maximum spin value provided for the pro-
gramme you have chosen. You can change
these values by operating the corresponding
buttons. The
green
pilot light of the button
8
starts to flash.
The selector dial can be turned either clockwise
or counterclockwise. Turn to position
to re-
set programme/Switching the machine off.
At the end of the programme the selector
dial must be turned to position
, to
switch the machine off.
Caution!
If you turn the programme
selector dial to another programme when
the machine is working, the
red
pilot light of
button
8
will blink 3 times and the message
Err
is displayed to indicate a wrong selection. The
machine will not perform the new selected
programme.
Reduce the spin speed by pressing button
2
By selecting a programme, the appliance pro-
poses automatically the maximum spin speed
provided for that programme.
Press button
2
repeatedly to change the spin
speed, if you want your laundry to be spun at a
different speed. The relevant light illuminates.
Select the available options by pressing
buttons 3, 4 and 6
Depending on the programme, different func-
tions can be combined. These must be selec-
ted after choosing the desired programme and
before pressing button
8
.
When these buttons are pressed, the corre-
sponding icons appear on the display. When
they are pressed again, the icons disappear. If
an incorrect option is selected, the integrated
red
pilot light of the button
8
flashes for 3 times
and the
Err
message appears on the display for
a few seconds.
For the compatibility among the washing
programmes and the options see chapter
«Washing Programmes».
Select the Delay Start by pressing button
10
Before you start the programme, if you wish to
delay the start, press the button
10
repeatedly,
to select the desired delay.
The selected delay time value (up to 20 hours)
will appear on the display a few seconds, then
the duration of the programme will appear
again.
You must select this option after you have set
the programme and before you press button
8
.
You can cancel or modify the delay time at any
moment, before you press button
8
.
Selecting the delayed start:
1.
Select the programme and the required
options.
2.
Select the delay start by pressing the but-
ton
10
.
3.
Press button
8
:
– the machine starts its hourly countdown.
10
www.zanussi.com
