background image

Drainage

Fit the U-piece on the drain-

age hose. Place everything

in a drainage point (or in a

sink) at a height of between

70 and 100 cm. Ensure it is

positioned securely. Air

must be able to enter the end

of the hose, to avoid any risk

of siphoning.

The drain hose must never be stretched. If it is too short,

contact an engineer.

Electrical connection

This washing machine must only be connected in single-

phased 230 V. Check the fuse size: 13 A for 230 V. The

appliance must not be connected with an extension lead

MINI 70 cm

MAXI 100 cm

or multi-plug adaptor. Ensure that the plug is earthed and

that it is in accordance with current regulations.

Positioning

Position the appliance on a flat and hard surface in a ven-

tilated location. Ensure the appliance does not come into

contact with the wall or other furniture. Accurate levelling

avoids vibrations, noise and prevents the appliance from

moving when running.

 

Environment

Disposing of the appliance

All materials carrying the   symbol are recyclable.

Dispose of them at a waste collection site (enquire

at your local council) for collection and recycling. When

disposing of your appliance, remove all parts which could

be dangerous to others: cut off the power supply cable at

the base of the appliance.
The symbol   on the product or on its packaging indi-

cates that this product may not be treated as household

waste. Instead it should be taken to the appropriate col-

lection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of cor-

rectly, you will help prevent potential negative conse-

quences for the environment and human health, which

could otherwise be caused by inappropriate waste han-

dling of this product. For more detailed information about

recycling of this product, please contact your local coun-

cil, your household waste disposal service or the shop

where you purchased the product.

Protecting the environment

To save water and energy and therefore help protect

the environment, we recommend the following:

• Whenever possible, use the appliance at full capacity

and avoid partial loads.

• Only use the prewash and soak programmes for heavily

soiled items.

• Use an appropriate amount of detergent for the hard-

ness of the water, the size of the load and how soiled

the washing is.

10

 

Summary of Contents for ZWQ 5100













Reviews: