Zanussi ZWN 7100 L, User Manual

Page: 17 / 28

Replace the drawer and run the rinse pro-
gramme without any clothes in the drum.
Cleaning the pump
The pump should be inspected regularly and
particularly if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise during
draining due to objects such as safety pins,
coins etc. blocking the pump;
• a problem with water draining is detected
(see chapter “What to do if...” for more de-
tails).
Warning! Before opening the pump door,
switch the appliance off and remove the
mains plug from the socket.
Proceed as follows:
• Unplug the appliance.
• If it is necessary, wait until the water has
cooled down.
Open the pump door.
Place a container
close to the pump to
collect any spillage.
Pull out the emergen-
cy emptying hose,
place it in the con-
tainer and remove its
cap.
When no more water comes out, unscrew the
pump cover by turning it anti-clockwise and
remove the filter. Use pliers, if necessary. Al-
ways keep a rag nearby to dry up any water
spillages when removing the cover.
Clean the filter under a tap, to remove any
traces of fluff.
Remove foreign bod-
ies and fluff from the
filter seat and from
the pump impeller.
Check carefully whether the pump impeller ro-
tates (it rotates jerkily). If it doesn’t rotate,
please contact your Service Centre.
Put the cap back on the emergency emptying
hose and place the latter back in its seat.
Replace the filter into
the pump by inserting
it correctly into the
special guides. Screw
the pump cover firmly
by turning it clock-
wise.
Close the pump door.
Caution! When the appliance is in use
and depending on the programme selected
there can be hot water in the pump.
Never remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When refitting
the pump cover, ensure it is securely re-
tightened so as to stop leaks and young
children being able to remove it.
17
www.zanussi.com