background image

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  2

Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4

Control Panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5

First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7

Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7

Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7

Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  9

Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  11

Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  14

What to do if ... _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  17

Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  19

Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  20

Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _   20

Environmental concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _  24

Subject to change without notice

 Safety information

Important! Read carefully & keep for future reference.
• The safety of Your appliance complies with the industry

standards and with legal requirements on the safety of

appliances. However, as manufacturers, we feel it is

our duty to provide the following safety notes.

• It is most important that this instruction book should

be retained with the appliance for future reference.

Should the appliance be sold or transferred to another

owner, or should you move house and leave the appli-

ance, always ensure that the book is supplied with the

appliance in order that the new owner can get to know

the functioning of the appliance and the relevant warn-

ings.

• You MUST read them carefully before installing or us-

ing the appliance.

• Before first starting up, check the appliance for any

damage incurred during transport. Never connect up a

damaged appliance . If parts are damaged, contact your

supplier.

• If the appliance is delivered in the winter months when

there are minus temperatures. Store it at room temper-

ature for 24 hours before using for the first time.

General safety

• It is dangerous to alter the specifications or attempt to

modify this product in any way.

• During high temperature wash programmes the door

glass may get hot. Do not touch it!

• Make sure that small pets and children do not climb

into the drum. To avoid this, please check into the

drum before using.

• Any objects such as coins, safety pins, nails, screws,

stones or any other hard, sharp material can cause ex-

tensive damage and must not be placed into the ma-

chine.

• Only use the advised quantities of fabric softener and

detergent. Damage to the fabric can ensue if you over-

fill. Refer to the manufacturer’s recommendations of

quantities.

• Wash small items such as socks, laces, washable belts

etc in a washing bag or pillow case as it is possible for

such items to slip down between the tub and the inner

drum.

• Do not use your washing machine to wash articles with

whalebones, material without hems or torn material.

• Always unplug the appliance and turn off the water

supply after use, cleaning and maintenance.

• Under no circumstances should you attempt to repair

the machine yourself. Repairs carried out by inexper-

ienced people may cause injury or serious malfunc-

tioning. Contact your local Service Centre. Always in-

sist on genuine spare parts.

Installation

• This appliance is heavy. Care should be taken when

moving it.

• When unpacking the appliance, check that it is not

damaged. If in doubt, do not use it and contact the

Service Centre.

• All packing and transit bolts must be removed before

use. Serious damage can occur to the product and to

property if this is not adhered to. See relevant section

in the user manual.

• After having installed the appliance, check that it is not

standing on the inlet and drain hose and the worktop is

not pressing the electrical supply cable against the

wall.

2

 

Summary of Contents for ZWH 7162 J





























Reviews: