background image

Cleaning the drawer recess

Having removed the draw-

er, use a small brush to

clean the recess, ensuring

that all washing powder

residue is removed from

the upper and lower part of

the recess.

Replace the drawer and run the rinse programme with-

out any clothes in the drum.

Cleaning the pump

The pump should be inspected regularly and particularly

if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise during draining

due to objects such as safety pins, coins etc. blocking

the pump;

• a problem with water draining is detected (see chapter

“What to do if...” for more details).

Warning! Before opening the pump door, switch the

appliance off and remove the mains plug from the

socket.
Proceed as follows:
• Unplug the appliance.
• If it is necessary, wait until the water has cooled down.

Open the pump door.

Place a container close to

the pump to collect any

spillage.

Pull out the emergency

emptying hose, place it in

the container and remove

its cap.

When no more water comes out, unscrew the pump

cover by turning it anti-clockwise and remove the filter.

Use pliers, if necessary. Always keep a rag nearby to

dry up any water spillages when removing the cover.

Clean the filter under a tap, to remove any traces of fluff.

Remove foreign bodies

and fluff from the filter seat

and from the pump impel-

ler.

Check carefully whether the pump impeller rotates (it

rotates jerkily). If it doesn’t rotate, please contact your

Service Centre.

Put the cap back on the emergency emptying hose and

place the latter back in its seat.

Replace the filter into the

pump by inserting it cor-

rectly into the special

guides. Screw the pump

cover firmly by turning it

clockwise.

Close the pump door.

 

15

Summary of Contents for ZWH 7162 J





























Reviews: