2.
To use liquid detergent:
1. Remove the drawer. Push the drawer
edge in the place with the arrow (PUSH) to
remove the drawer easily.
3.
B
2. Adjust the flap in position B.
3. Put back the drawer in the recess.
When you use the liquid detergent:
• Do not use gelatinous or thick
liquid detergents.
• Do not put more liquid then 120
ml.
• Do not set the delay start.
When the flap is in position B and you want to
use powder detergent:
1. Remove the drawer.
2. Adjust the flap in position A.
3. Put back the drawer in the recess.
• Measure out the detergent and the fabric
conditioner.
• Put the detergent and the fabric conditioner
into the compartments.
• Carefully close the detergent drawer.
Activating the appliance
Press and hold for a couple of seconds the
On/Off button to activate or deactivate the
appliance.
A tune sounds when the appliance is activated.
Setting a programme
1. Touch the programme button and set the
programme:
• The indicator of the button
flashes
slowly.
2. If necessary, change the temperature and
the spin speed or add available options.
When you activate an option, the indicator
of the set option comes on.
If you set something incorrect, the
indicator of the button
flashes
red three times.
Starting a programme without the delay
start
Touch the button
.
• The indicator of the button
stops to
flash and stays on.
• The programme starts, the door locks,
the indicator
is on.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
Starting a programme with the delay
start
The start of the programme can be delayed by
9, 6 or 3 hours.
1. Touch the button Delay Start to choose
the delay you want to set.
The indicator of the selected delay is on.
2. Touch the button
:
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the delay start before you touch the
button
. After touching the
button
you can only cancel the
delay.
www.zanussi.com
11
