background image

To activate this device, ro-

tate the button (without

pressing it) inside the

door clockwise until the

groove is horizontal. If

necessary use a coin.

To disable this device and

restore the possibility of

closing the door, rotate the

button anti-clockwise un-

til the groove is vertical.

Frost precaution

If the appliance is installed in a place where the temper-

ature could drop below 0°C, proceed as follows to remove

any water remaining inside the appliance:
1. unplug the appliance;
2. turn off the water tap;
3. unscrew the water inlet hose from the tap;
4. unscrew the drain hose from the rear support and

unhook it from sink or spigot;

5. place a bowl on the floor;
6. let the drain hose run along the floor, place the ex-

ternal extremities of the drain and inlet hoses in the

bowl placed on the floor and let water drain out com-

pletely;

7. screw the water inlet hose to the tap and the drain

hose to the rear of the appliance again;

When you intend to start the appliance up again, make

sure that the room temperature is above 0°C.

Environment concerns

The symbol     on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please

contact your local council, your household waste disposal

service or the shop where you purchased the product.

Packaging materials

The materials marked with the symbol   are recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

This means that they can be recycled by disposing of them

properly in appropriate collection containers.

4

 

Summary of Contents for ZWF 5120 P





























Reviews: