Zanussi ZWF 01486ZS, User Manual

Page: 10 / 24

The related indicator comes on.
1)
SETTINGS
EXTRA RINSE
With this option you can permanently have an extra
rinse when you set a new programme.
• To activate/deactivate this option touch the
buttons and at the same time until the
indicator comes on/goes off.
CHILD LOCK
With this option you can prevent that the children
play with the control panel.
• To activate/deactivate this option, touch the
buttons and at the same time until the
indicator comes on/goes off.
Activate this option after you touch the button :
the buttons are locked (except for the button ) .
This option stays active even when you
switch off the appliance.
ACOUSTIC SIGNALS
The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic signals,
touch the buttons and at the same time for 4
seconds.
If you deactivate the acoustic signals,
they continue operate when the
appliance has a malfunction.
BEFORE FIRST USE
WARNING! Refer to Safety chapters.
BEFORE FIRST USE
1. Put a small quantity of detergent in the
compartment for washing phase.
2. Set and start a programme for cotton at the
highest temperature without laundry.
This removes all possible dirt from the drum and the
tub.
CLOCK SETTING
1. Touch the button and the button at the
same time for some seconds.
The hour digits flash.
2. Touch the button to change (or confirm) the
hour. The hours change with the steps of one
hour.
2)
3. Touch the button to confirm the selection.
The minute digits flash.
4. Touch the button to change (or confirm) the
minutes. The minutes change with the steps of
one minute.
2)
5. Touch the button to confirm the selection.
The appliance enters automatically in
clock setting mode when:
• you activate the appliance for the first time after
the installation,
• you activate the appliance for the first time after
it has been unplugged for more than two weeks,
• you did not confirm the time selection within 15
seconds period from last button touching,
• you switched the appliance off before
confirming the time.
1) See in "Settings" how to activate this option.
2) If you keep the button pressed the digits change in a quicker way.
10