background image

CARE AND CLEANING

WARNING! Refer to Safety chapters.

CLEANING THE INTERIOR
Before using the appliance for the first time, the

interior and all internal accessories should be

washed with lukewarm water and some neutral

soap to remove the typical smell of a brand-new

product, then dried thoroughly.

CAUTION! Do not use detergents,

abrasive powders, chlorine or oil-

based cleaners as they will damage

the finish.

CAUTION! The accessories and parts

of the appliance are not suitable for

washing in a dishwasher.

PERIODIC CLEANING
The equipment has to be cleaned regularly:

1. Clean the inside and accessories with

lukewarm water and some neutral soap.

2. Regularly check the door seals and wipe them

clean to ensure they are clean and free from

debris.

3. Rinse and dry thoroughly.

DEFROSTING OF THE FREEZER

CAUTION! Never use sharp metal

tools to scrape off frost from the

evaporator as you could damage it.

Do not use a mechanical device or any

artificial means to speed up the

thawing process other than those

recommended by the manufacturer.

About 12 hours prior to defrosting set

a lower temperature in order to build

up sufficient chill reserve in case of

any interruption in operation.

A certain amount of frost will always form on the

freezer shelves and around the top compartment.
Defrost the freezer when the frost layer reaches a

thickness of about 3-5 mm.

1. Switch off the appliance or pull out electrical

plug from the wall socket.

2. Remove any stored food and put it in a cool

place. 

CAUTION! A temperature rise of

the frozen food packs during

defrosting may shorten their safe

storage life.

Do not touch frozen goods with

wet hands. Hands can freeze to

the goods.

3. Leave the door open. Protect the floor from the

defrosting water e.g. with a cloth or a flat

vessel.

4. In order to speed up the defrosting process,

place a pot of warm water in the freezer

compartment. In addition, remove pieces of ice

that break away before defrosting is complete.

Use the supplied ice scraper for this purpose.

5. Insert the plastic scraper in the appropriate

seating at the bottom centre, placing a basin

underneath to collect the defrost water.

6. When defrosting is complete, dry the interior

thoroughly. Keep the ice scraper for the future

use.

7. Switch on the appliance and close the door.

8. Set the temperature regulator to obtain the

maximum coldness and run the appliance for at

least 3 hours using this setting.

Only after this time put the food back into the

freezer compartment.

PERIOD OF NON-OPERATION
When the appliance is not in use for long period,

take the following precautions:

1. Disconnect the appliance from electricity

supply.

2. Remove all food.

3. Defrost the appliance.

4. Clean the appliance and all accessories.

5. Leave the door open to prevent unpleasant

smells.

11

Summary of Contents for ZUAN22FW

















Reviews: