Zanussi ZT 695, Instruction Book

Page: 2 / 24

2
The control panel
Description of the appliance
1. Levelling spacers
2. Upper basket stop
3. Upper spray arm
4. Salt container
5. Large filter
6. Detergent dispenser
7. Control panel
8. Rating plate
9. Rinse aid dispenser
10. Central filter
11. Lower spray arm
12. Upper basket
13. SID detergent dispenser
(Super Intensity Dispenser)
1
2
3
4
6
7
5
8
9
10
11
13
12
IN72
In this fully integrated appliance the controls are located
on the top of the door. When selecting a programme, the
door needs to be open.
1. ON/OFF push button
2. ON/OFF indicator light
3. Programme selector push buttons
4. "END OF CYCLE" indicator light
Audible signals have been introduced to help indicate
which operations the dishwasher is performing.
Short signal "instruction accepted"
When any of the push buttons are pressed (except the
ON/OFF push button), a short audible signal informs you
that the machine has accepted the instruction given.
Long signal "programme starting"
A continuous audible signal, heard only when you close
the dishwasher door, informs you that the washing
programme is starting.
Intermittent signal "end of programme"
An intermittent audible signal informs you that the wash
programme has ended.
If you wish to deactivate these audible signals, press both
programme buttons 3 and 4 for about 3 seconds, until the
intermittent audible signal can no longer be heard.
To reactivate the audible signals, press buttons together
again for about 3 seconds, until an intermittent audible
signal is heard.
The setting will remain memorised after switching off
the dishwasher.
SO323