background image

• This appliance is fitted with a 13 A mains plug. If

it is necessary to change the mains plug fuse,

use only a 13 A ASTA (BS 1362) fuse (UK and

Ireland only).

WATER CONNECTION
• Do not cause damage to the water hoses.

• Before connection to new pipes, pipes not used

for a long time, where repair work has been

carried out or new devices fitted (water meters,

etc.), let the water flow until it is clean and clear.

• Ensure that there are no visible water leaks

during and after the first use of the appliance.

• The water inlet hose has a safety valve and a

sheath with an inner mains cable.

WARNING! Dangerous voltage.

• If the water inlet hose is damaged, immediately

close the water tap and disconnect the mains

plug from the mains socket. Contact the

Authorised Service Centre to replace the water

inlet hose.

USE
• Do not put flammable products or items that are

wet with flammable products in, near or on the

appliance.

• Dishwasher detergents are dangerous. Follow

the safety instructions on the detergent

packaging.

• Do not drink and play with the water in the

appliance.

• Do not remove the dishes from the appliance

until the programme is complete. Some

detergent may remain on the dishes.

• Do not store items or apply pressure on the

open door of the appliance.

• The appliance can release hot steam if you open

the door while a programme operates.

SERVICE
• To repair the appliance contact the Authorised

Service Centre. Use original spare parts only.

• Please note that self-repair or non-professional

repair can have safety consequences and might

void the guarantee.

• The following spare parts will be available for 7

years after the model has been discontinued:

motor, circulation and drain pump, heaters and

heating elements, including heat pumps, piping

and related equipment including hoses, valves,

filters and aquastops, structural and interior

parts related to door assemblies, printed circuit

boards, electronic displays, pressure switches,

thermostats and sensors, software and firmware

including reset software. Please note that some

of these spare parts are only available to

professional repairers, and that not all spare

parts are relevant for all models.

• The following spare parts will be available for 10

years after the model has been discontinued:

door hinge and seals, other seals, spray arms,

drain filters, interior racks and plastic peripherals

such as baskets and lids.

DISPOSAL

WARNING! Risk of injury or

suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent children and

pets to get closed in the appliance.

PRODUCT DESCRIPTION

The graphics below is just a general

product overview. For more detailed

information, refer to other chapters

and/or documents provided with the

appliance.

4

Summary of Contents for ZSLN2321

























Reviews: