background image

Problem

Possible solution

 

Make sure that the mains plug is connected to the mains socket.

 

Do a check and see if there is voltage. Connect a different appliance
to the same mains socket. To repair a mains socket, contact a quali-
fied electrician.

The lamp does not come on.

Close and open the door to make sure that the lamp is not in standby.

 

The lamp is defective. Replace the lamp.

The compressor operates continu-
ously.

Set the temperature knob at a lower position.

 

Make sure that the appliance door is closed.

 

Make sure not to open and close the appliance door too frequently.

 

Make sure not to put hot food in the appliance. Wait until it becomes
cool.

 

Make sure that the room temperature is not too warm.

Water collects on the rear plate of
the fridge.

It is normal that this occurs when the automatic defrosting operates.

Water collects in the fridge.

Make sure that the drain hole is not clogged.

 

Make sure that food or packaging do not prevent the water to collect
in the water container.

There is water on the floor.

The melting water outlet does not flow in the evaporative tray above
the compressor.
Attach the melting water outlet to the evaporative tray.

The temperature in the appliance is
too cold

Set the temperature knob to a lower position.

The temperature in the appliance is
not sufficiently cold.

Set the temperature knob to a higher position.

 

Make sure that the appliance door is closed.

 

Make sure not to put hot food in the appliance. Wait for the food to
become cool.

 

Make sure that the appliance is not too full.

The temperature in the fridge is not
sufficiently cold.

Make sure that there is cold air circulation.

There is too much frost.

Make sure that the food is closed in special containers or packaging.

 

Make sure that the appliance door is closed.

 

Set the temperature knob to a lower position.

Technical information

Positioning

This appliance can be installed in a dry, well
ventilated indoor (garage or cellar) also, but for
optimum performance install this appliance at a
location where the ambient temperature corre-

sponds to the climate class indicated on the
rating plate of the appliance:

8

 

www.zanussi.com

Summary of Contents for ZRT18100WA













Reviews: