background image

Contents

Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5

Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _  6
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7
Technical information _ _ _ _ _ _ _ _ _ _ _ _ _  8
Environmental concerns _ _ _ _ _ _ _ _ _ _  10

Subject to change without notice.

 Safety 

instructions

Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible if an incorrect
installation and use causes injuries and dam-
ages. Always keep the instructions with the ap-
pliance for future reference.

Children and vulnerable people safety

Warning!

 Risk of suffocation, injury or

permanent disability.

• This appliance can be used by children aged

from 8 years and above and persons with re-
duced physical, sensory or mental capabili-
ties or lack of experience and knowledge if
they have been given supervision or instruc-
tion for the operation of the appliance by a
person who is responsible for their safety.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Cleaning and user maintenance shall not be

made by children without supervision.

Installation

Warning!

 Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied

with the appliance.

• Always be careful when you move the appli-

ance because it is heavy. Always wear safety
gloves.

• Make sure the air can circulate around the

appliance.

• Wait at least 4 hours before connecting the

appliance to the power supply. This is to al-
low the oil to flow back in the compressor.

• Do not install the appliance close to radiators

or cookers, oven or hobs.

Only for appliances with water connec-
tion: 

connect only to drinking water supply.

• The rear of the appliance must stand against

the wall.

• Do not install the appliance where there is di-

rect sunlight.

Electrical connection

Warning!

 Risk of fire and electrical shock.

• The appliance must be earthed.

• All electrical connections should be made by

a qualified electrician.

• Make sure that the electrical information on

the rating plate agrees with the power sup-
ply. If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and exten-

sion cables.

• Make sure not to cause damage to the elec-

trical components (e.g. mains plug, mains ca-
ble, compressor). Contact the Service or an
electrician to change the electrical compo-
nents.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.

• The mains cable must stay below the level of

the mains plug.

2

 

www.zanussi.com

Summary of Contents for ZRT18100WA













Reviews: