Problem
Possible cause
Solution
The product temperature is too
high.
Let the product temperature de-
crease to room temperature before
storage.
Many products are stored at the
same time.
Store less products at the same
time.
The temperature in the re-
frigerator is too high.
There is no cold air circulation in
the appliance.
Make sure that there is cold air circu-
lation in the appliance.
Replacing the bulb
If you want to replace the bulb, do these steps:
1.
Break the circuit of the appliance.
2.
Unscrew the lamp cover securing screw.
3.
Unhook the moving part by pressing it as
shown in the figure.
4.
Replace the bulb with one of the same
power and specifically designed for house-
hold appliances (the maximum power is
shown on the light bulb cover).
5.
Fix the lamp cover in place.
6.
Screw the lamp cover securing screw.
7.
Reconnect the appliance.
8.
Open the door and check if the light
comes on.
Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to "In-
stallation".
3.
If necessary, replace the defective door
gaskets. Contact the Service Center.
Technical data
Dimension
Height
850 mm
Width
550 mm
Depth
612 mm
Voltage
230 V
Frequency
50 Hz
The technical information are situated in the rat-
ing plate on the internal left side of the appli-
ance and in the energy label.
Installation
Caution!
Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before installing the
appliance.
8
www.zanussi.com
