Display shows:
Description
Possible cause
Remedy
The display shows an error
code that is not in this table.
There is an electrical fault.
• Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
• If the display shows the er-
ror code again, contact the
Customer Care Depart-
ment.
The display shows "12.00".
There was a power cut.
Set the clock.
Problems with cleaning procedure
Description
Possible cause
Remedy
Steam and condensation settle
on the food and in the cavity of
the oven.
You left the dish in the oven for
too long.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
The water in the cavity em-
bossment does not boil.
The temperature is too low.
Set the temperature at least to
110 °C.
Refer to "Hints and tips" chap-
ter.
The water comes out of the
cavity embossment.
There is too much water in the
cavity embossment.
Deactivate the oven and make
sure that the appliance is cold.
Wipe the water with a cloth or
sponge. Add the correct
amount of water to the cavity
embossment. Refer to the spe-
cific procedure.
Other problems
Description
Possible cause
Remedy
There is no good cooking per-
formance using the function:
True Fan Cooking PLUS.
You did not fill the cavity em-
bossment with water.
Refer to "Setting the function:
True Fan Cooking PLUS".
32