BUTTONS
Button
Function
Description
MINUS
To set the time.
CLOCK
To set a clock function.
PLUS
To set the time.
HEAT-UP INDICATOR
When you activate an oven function, the bars in the
display come on one by one. The bars show
that the oven temperature increases or decreases.
CLOCK FUNCTIONS
CLOCK FUNCTIONS TABLE
Clock function
Application
TIME OF DAY
To set, change or check the time of day. Refer to "Setting the
time".
MINUTE MINDER
Use to set a countdown time (maximum 23 h 59 min). This
function has no effect on the operation of the appliance. You
can set the MINUTE MINDER at any time, also if the appliance
is off.
DURATION
To set how long the appliance operates. Use only when an
oven function is set.
END
To set when the appliance must deactivate. Use only when an
oven function is set. You can use Duration and End at the
same time (time delay), if the appliance is to be activate and
deactivate automatically later.
Press again and again to switch
between the clock functions.
To confirm the settings of the clock
functions, press or wait 5 seconds
for an automatic confirmation.
SETTING THE DURATION OR END
1. Set an oven function.
2. Press again and again until the display
shows
or
.
or
flashes in the display.
3. Press or to the set the values and press
to confirm.
For Duration
first you set the minutes and
then the hours, for End first you set the
hours and then the minutes.
An acoustic signal sounds for 2 minutes after the
time ends.
or
symbol and time setting flash
in the display. The oven stops.
4. Press any button to stop the acoustic signal.
5. Turn the knob for the oven functions to the off
position.
8
Downloaded from www.vandenborre.be
