Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
Possible cause
Remedy
The oven does not heat up.
The oven is deactivated.
Activate the oven.
The oven does not heat up.
The fuse is blown.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
The oven does not operate.
The automatic ignition does not
work.
Ignite the burner manually with a
long match. Hold the flame near
the hole in the bottom of the oven
cavity. At the same time push the
knob for the gas control and turn
it counterclockwise to the maxi-
mum temperature. When the
flame comes on, keep the knob
for the gas control pushed for 15
seconds or less to let the ther-
mocouple warm up. If not, the
gas flow is interrupted.
The lamp does not operate.
The lamp is defective.
Replace the lamp.
Steam and condensation settle
on the food and in the cavity of
the oven.
You left the dish in the oven for
too long.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
The flame extinguishes immedi-
ately after ignition.
Thermocouple is not heated up
sufficiently.
After lightning the flame, keep the
knob for the gas control pushed
for 15 seconds or less.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
20
www.zanussi.com
Summary of Contents for ZOG21317XK
Page 1: ...EN ZOG21317XK User Manual Oven EG ...
Page 25: ...www zanussi com 25 ...
Page 26: ...26 www zanussi com ...
Page 27: ...www zanussi com 27 ...