25
)
1
2
3
Removable telescopic Shelf Supports
and Catalytic Panels
Be careful when removing the
telescopic shelf supports. The
catalytic panels are not fixed to the
oven walls and may fall out when the
shelf supports are removed.
The shelf supports with telescopic runners and
the catalytic panels can be removed for easy
cleaning.
Make sure the appliance has cooled
down completely before cleaning.
Proceed as follows :
1. Use one hand to pull on the front part of the
shelf support to remove it while keeping the
shelf support and catalytic panel in place with
the other hand (
1
).
2. Hold the shelf support and catalytic panel in
place and at the same time unhook the shelf
support at the back (
2
).
3. Clean the shelf supports with warm, soapy
water and wipe it with a soft cloth. Never
use abrasive products which could damage
them.
Important:
The telescopic runners must not
be cleaned in the dishwasher.
Attention:
the rollers must not be greased.
4. Once you have finished cleaning assemble
the shelf support and catalytic panel and
replace it again (reverse the steps above) -
(
3
).
Check that the hooks are engaged properly
when you replace the shelf support and
catalytic panel.
It is possible to remove the telescopic runners
only, unlocking the elements as shown on page
16.
