5
Fig. 5A
A
1 Minute timer
2 Cooking time
3 Cooking end
4 Subtract time
5 Add time
1
2
3
4
5
Setting
After pressing a function button the time required can be set with
the +/- buttons.
The counting-up and counting-down speed increases when the
buttons are held down.
If a function button is just briefly touched and released, the selected
function is displayed for 5 seconds. Within this time setting may
be commenced.
Five seconds after releasing the function button or after setting
is completed, the display reverts to time of day.
When a programme has been set, it starts immediately.
Selection of a function is accompanied by a sound signal.
Setting the time
Press the cooking time and the end time simultaneously, and set
the time with +/- buttons.
This deletes any previously set programme.
Manual use
By pressing simultaneously 2 and 3 buttons (the automatic
symbol will be erased), the saucepan symbol lights up.
This deletes any previously set programme.
Semi-automatic use with cooking time setting
Press the cooking time button and set the desired time with +/-.
The saucepan and A symbol appear.
The relay switches on immediately.
When the cooking end time corresponds to the time of day, the
relay and the saucepan symbol switch off.
The sound signal rings and the A symbol flashes.
Semi-manual use with end time setting
Press the end time button and set the desired time with +/-.
The saucepan and A symbol light up.
The relay switches on.
When the cooking end time corresponds to the time of day, the
relay and the saucepan symbol switch off.
The sound signal rings and the A flashes.
“LED” PROGRAMMER (Fig. 5A)
Features
24 hours clock with automatic programme and minutes counter.
Functions
Cooking time, cooking end time, clock, minutes counter, times
to be set up to 23 hours 59 minutes. Manual selection.
Display
4-figures, 7-segments diplay for cooking times and time of day.
Display for identification of timer conditions:
Automatic setting
= A
Time and manual use
= saucepan symbol
Minutes counter
= bell symbol
Fully automatic use
Press the cooking time button and select the length of the cooking
time with +/-.
The A symbol appears.
The relay switches on and the saucepan symbol appears.
By setting the cooking end function, the next cooking end time
appears.
Set the cooking end time with +/-.
The saucepan symbol appears again when the time of day
corresponds to the cooking start time.
When the automatic programme is over, the A symbol flashes.
The sound signal rings, the saucepan symbol and the relay switch
off.
Minutes counter
Press the minutes counter button and set the cooking time with
+/- button.
The bell symbol lights up when the minutes counter is operating.
When the set time is up, the sound signal rings.
Sound signal
The sound signal (0.5 Hz) rings at the end of a programme or of
the minutes counter function and it lasts for 7 minutes.
To stop it, push the button 1.
Start programme and check
The programme starts after the required time has been set.
The programme can be checked at any time by pressing the
corresponding button.
Setting error
A setting error is made if the time of day on the clock falls within
the cooking start and end times.
When an error occurs, the sound signal rings and the A symbol
flashes.
To correct the setting error, change the cooking time and cooking
end time.
Cancelling a setting
To cancel a setting, press the manual function.
A set programme will automatically cancel on completion.
