• To clean metal surfaces, use a dedicated
cleaning agent.
• Clean the appliance interior after each use. Fat
accumulation or other food remains may result
in a fire. The risk is higher for the grill pan.
• Clean stubborn dirt with a special oven cleaner.
• Clean all accessories after each use and let
them dry. Use a soft cloth with warm water and
a cleaning agent.
• If you have nonstick accessories, do not clean
them using aggressive agents, sharp-edged
objects or a dishwasher. It can cause damage
to the nonstick coating.
STAINLESS STEEL OR ALUMINIUM
APPLIANCES
Clean the oven door with a damp cloth
or sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or
abrasive materials as they can damage
the oven surface. Clean the oven
control panel with the same
precautions.
CLEANING THE DOOR GASKET
• Regularly do a check of the door gasket. The
door gasket is around the frame of the oven
cavity. Do not use the appliance if the door
gasket is damaged. Contact an Authorised
Service Centre.
• To clean the door gasket, refer to the general
information about cleaning.
REMOVING THE SHELF SUPPORTS AND
REMOVING THE CATALYTIC PANELS
To clean the oven, remove the shelf supports and
remove the catalytic panels.
CAUTION! Be careful when you
remove the shelf supports. The
catalytic panels are not attached to the
oven walls and can fall out when you
remove the shelf supports.
1. Pull the front of the shelf support away from the
side wall. Hold the rear shelf runners and
catalytic panel in place with the other hand.
2. Pull the rear end of the shelf support away from
the side wall and remove it.
2
1
Install the shelf supports in the opposite sequence.
The retaining pins on the telescopic
runners must point to the front.
CATALYTIC CLEANING
CAUTION! Do not clean the catalytic
surface with oven sprays, abrasive
cleaning agents, soap or other
cleaning agents. This will damage the
catalytic surface.
Spots or discolouration of the catalytic
surface have no effect on catalytic
properties.
WARNING! Keep children away when
you clean the oven at a high
temperature. The oven surface
becomes very hot and there is a risk of
burns.
Before activating the catalytic cleaning
remove all the accessories from the
oven.
The walls with a catalytic coating are self-cleaning.
They absorb fat which collects on the walls while
the appliance operates.
To support the self-cleaning procedure, heat the
empty oven on a regular basis.
1. Clean the oven floor with warm water and
washing up liquid, then dry it.
2. Set the function .
3. Set the oven temperature to 250 °C and let the
oven operate for 1 hour.
4. When the appliance is cool, clean it with a soft
and moist sponge.
CLEANING THE OVEN DOOR
The oven door has two glass panels. You can
remove the internal glass panel to clean it.
18
Summary of Contents for ZOA35675WK
Page 23: ...23 ...
