8
www.zanussi.com
Installing the appliance
1.
Remove all packaging and check
carefully for any signs of damage.
2.
This oven is designed to fit into a
350 mm high cupboard as standard.
When fitting into a 360 mm high
cupboard:- Unscrew and remove the
4 feet from the bottom of the oven.
Rotate the feet 90 degrees and refit with
the long side to the front of the oven.
3
. Fit the fixing hook to the right hand side
of the kitchen cupboard using the
instruction sheet supplied.
4
. Fit the appliance into the kitchen
cupboard slowly, and without force. The
appliance should be lifted onto the fixing
hook and then lowered into place. Fix the
oven on the left hand side using the two
screws provided.
5
. Ensure the appliance is stable and not
leaning. Ensure that a 2.5 mm gap is
kept between the cupboard door above
and the top of the frame (see diagram).
2.5 mm
2.5 mm
4 mm
4 mm
ZANUSSI_EN240_CS_BASE_AE25UICTO_SAFETYMAY19_Layout 1 27/08/2019 14:00 Page 8
